Multiple Pipers

For enhanced security, you can install multiple Pipers on a home network to arm different floors or high traffic areas. A maximum of five Pipers sharing the same home Wi-Fi network can be linked to one account. All Pipers configured under the same account follow the security mode, notification and automation rules set in the Piper mobile app.

You can monitor live video, view environmental sensor data, and receive security notifications from each Piper.

Multi Piper Setup         

To set up additional Pipers on a network using the same account, please follow the steps below. iOS and Android devices follow separate instructions after the physical installation of your Piper.

Note: The initial piper must be set up before additional Pipers can be added. 

Follow these steps to add an additional Piper to your network:

1. Remove Piper from its detachable stand.           
2. Open the battery door located at the back of Piper and insert the provided AA batteries. Close the battery door and secure it with the provided screw.
3. Connect the power cable to Piper and plug the opposite end to an electrical outlet.
4. Re-attach the stand (or affix the optional wall mount) and position your Piper in the desired location. For optimal viewing capacity, we recommend placing Piper in a high traffic area.
5. Press the power button on the back of Piper, located on the bottom-right. Piper’s LED light will be yellow while starting up.

Multi Piper Mobile App Setup

You are now ready to connect your mobile device to the new Piper.

• For setup instructions using an iOS device, go to Multi Piper Setup: iOS.
• For setup instructions using an Android device, go to Multi Piper Setup: Android.

Multi Piper Setup: iOS

Follow these steps to set up Piper from your Apple iOS device:

1. When Piper’s LED light turns blue, open the Piper app, tap the App Menu icon and go to Settings > Multi Piper Management.
2. Select “Add a Piper.”
3. Give the new Piper a name and tap “Continue” to proceed.

4. Open your iOS device’s settings and go to the Wi-Fi screen. Select “Piper” from the list of networks.
   Note: In this step, your mobile device is connecting to your Piper via Wi-Fi to set it up.

5. Once your mobile device has connected to the “Piper” Wi-Fi network, return to the Piper app. 
6. Your Piper will automatically update to the latest firmware if necessary, and then finish setup.
   Note: This process may take up to 10 minutes or more. Do not unplug or turn off your Piper during this process.
7. The name of the new Piper should now appear on the Multi Piper Management screen.

The setup of all additional Pipers follows the same instructions as listed above. After each successful installation, the Dashboard screen will appear.

Multi Piper Setup: Android

Follow these steps to set up Piper from your Android device:

1. When Piper’s LED light turns blue, open the Piper app, tap the App Menu icon and go to Settings > Multi Piper Management.
2. Select “Add a Piper.”
3. Give the new Piper a name and tap “Continue” to proceed.
4. Connect your Android device to the “Piper” Wi-Fi network by selecting “Connect.”
   Note: In this step, your mobile device is connecting to your Piper via Wi-Fi to set it up. 
5. Your Piper will automatically update to the latest firmware if necessary, and then finish setup.
   Note: This process may take up to 10 minutes or more. Do not unplug or turn off your Piper during this process.    
6. The name of the new Piper should now appear on the Multi Piper Management screen.

The setup of all additional Pipers follows the same instructions as listed above. After each successful installation, the Dashboard screen will appear.